Mobile Bluetooth Printer | Draeger

The Dräger Mobile Bluetooth Printer pairs seamlessly with Dräger gas detection instruments and breathalyzers for rapid, on-site results documentation. Compact and lightweight, it provides fast, clear printouts of test results and supports wireless operation for efficient reporting in the field or in mobile testing environments.

Technical specifications

• Measuring principle: Electrochemical Dräger sensor for 1/4" technology, alcohol specific
• Measuring range: 0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed
• Sampling: Standard: automatic sampling when minimum volume resp. defined blow time is reached; Passive sampling without mouthpiece or manual initiation of sampling possible
• Ready for use: Approx. 2 s after switching on
• Display of the measurement results: After approx. 3 s (at 0 mg/L, room temperature)
• Operating temperature: -5 to +50 °C / 23 to 122 °F
• Relative humidity: 10 to 100 % relative humidity (non-condensing and in operating state)
• Ambient pressure: 600 to 1,300 hPa / 17.7 to 38.4 inch Hg
• Display: Graphic backlit LCD display; 32 x 22 mm / 1.3" x 0.9" (128 x 64 pixels)
• LED: 2-colour, to support display of results and warning messages
• Audible signal: Different signal tones to support display messages and warnings
• Datalogger: Storage of last 500 tests with test numbers
• Power supply: 1 x CR123A-Battery, charge level indicator in display, with one battery approx. 1,500 breath tests can be done.
• Mouthpiece adaption: Improved Slide’n’click mouthpiece attachment; can be fitted for right or left orientation
• Mouthpiece: Hygienically, individually packaged, with tamper-proof, tamperproof air outlet, mouthpiece ejector and spacer between mouth and instrument housing
• Operating concept:Measurement functions can be performed using just one button; menu navigation is via two menu button
• Calibration: Wet gas or dry gas calibration
• Housing: Impact resistant ABS/PC
• Dimensions (W x H x D), weight: Approx. 50/60 x 141 x 31 mm / 2"/2.4" x 5.6" x 1.2"; approx. 150g / 0.33 lbs, incl. battery
• Instrument configuration: Direct menu-guided configuration of instrument settings (PIN required) No additional PC software needed
• Vibration and shock: EN 60068-2-27, EN 60068-2-6; EN600-2-64
• CE marking: CE conform
• Norms: EN 15964, NHTSA, FDA Conformity, depending on configuration
• Internal clock: Warning or deactivation after end of service interval
• Protection type: IP54
• Bluetooth* (optional): For the communication with the Dräger Mobile Printer BT

Download Product Datasheet

Instruction For Use